Introduction

Warning: Disconnect the power supply prior to commencing installation of the wall mount or any wiring.

  1. Before fastening wallmount to the conduit box please make sure that the connection terminals on the back of the wallmount are properly connected.
    • Before fastening wallmount to the conduit box please make sure that the connection terminals on the back of the wallmount are properly connected.

    • Place the wall mount on the conduit box (ø 60.3mm) and insert two screws which are provided.

  2. Screw the screws in the conduit box.
    • Screw the screws in the conduit box.

  3. After fastening the wall mount to the conduit box, please make sure that all of the holes are closed and that there is no clear air flow from the wall to the device!
    • After fastening the wall mount to the conduit box, please make sure that all of the holes are closed and that there is no clear air flow from the wall to the device!

  4. IMPORTANT: Before proceeding to the next step, verify all connections are in the correct terminals and that the correct voltage is being provided. Attach E35-FAN… to the wall mount by sliding the unit onto the mounting brackets as shown in the diagrams below. The unit will click into position. Turn on the power supply and the unit will automatically turn on. Attach E35-FAN… to the wall mount by sliding the unit onto the mounting brackets as shown in the diagrams below. The unit will click into position. Turn on the power supply and the unit will automatically turn on.
    • IMPORTANT: Before proceeding to the next step, verify all connections are in the correct terminals and that the correct voltage is being provided.

    • Attach E35-FAN… to the wall mount by sliding the unit onto the mounting brackets as shown in the diagrams below. The unit will click into position. Turn on the power supply and the unit will automatically turn on.

  5. To remove or detach device from the wall mount, press the release bracket on the bottom of the device and then pull the device upwards.
    • To remove or detach device from the wall mount, press the release bracket on the bottom of the device and then pull the device upwards.

    • Warning: Ensure that the power supply has been switched prior to removing the device from the wall mount.

Finish Line

Marko Lasic

Member since: 12/12/2016

3,290 Reputation

226 Guides authored

Team

Pobjednici Member of Pobjednici

1 Member

226 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 12