Introduction
Learn how to change set desired room temperature, fan speed or humidity
-
-
On Home Screen press central button until Temperature Setpoint is displayed
-
Use SP - Button to decrease temperature SP by 0.5 °C.
-
Use SP + Button to increase temperature SP by 0.5 °C.
-
-
-
In Advanced -> Parameters 1 / 5 Menu select Fan Motor Type: EC Motor. In this mode Fan speed can be;
-
Auto
-
Off
-
20%, 40%, 60%, 80%, 100% (corresponding to precentage of ECM Min and Max range determined in Parameters 2 / 5)
-
Picture 1. On Home Screen press Setpoint button until you select Fan Speed.
-
Press SP + button to go through values of fan speeds: OFF -> 20% -> 40% -> 60% -> 80% -> 100% -> AUTO
-
Press SP - button to go through values of fan speeds: AUTO -> 100% -> 80% -> 60% -> 40% -> 20% -> OFF
-
The Fan Speed display also changes to match the selected Fan Speed, with a slight delay
-
-
-
In Advanced -> Parameters 1 / 5 Menu select Fan Motor Type: EC Motor. In this mode Fan speed can be:
-
AUTO (Picture 1.)
-
ON (Picture 2.)
-
OFF (Picture 3.)
-
On Home Screen press Setpoint button until you select Fan Speed.
-
Press SP + button to go through values of fan speeds: OFF -> ON-> AUTO
-
Press SP - button to go through values of fan speeds: AUTO ->ON-> OFF
-
The Fan Speed display also changes to match the selected Fan Speed, with a slight delay
-
-
-
In Advanced -> Parameters 1 / 5 Menu select Fan Motor Type: 1 speed motor. In this mode Fan speed can be:
-
AUTO
-
One of 3 speeds: 1 speed - 2.5V (Picture 1), 2 speed - 5.0V (Picture 2), 3 speed - 7.0V (Picture 3)
-
OFF
-
On Home Screen press Setpoint button until you select Fan Speed.
-
Press SP + button to go through values of fan speeds: OFF -> 1/3 speed-> 2/3 speed-> 3/3 speed-> AUTO
-
Press SP - button to go through values of fan speeds: AUTO -> 3/3 speed-> 2/3 speed-> 1/3 speed-> OFF
-
The Fan Speed display also changes to match the selected Fan Speed, with a slight delay
-
