Skip to main content

Introduction

Learn how to change various Setpoints on the Home Screen

  1. Picture 1 Current working mode Picture 1 Press working mode button to enter Working modes menu
    • Picture 1 Current working mode

    • Picture 1 Press working mode button to enter Working modes menu

    • Working modes are created to easily change all set points manually or according to daily timers and weekly scheduler.

    • Picture 2 Select Comfort, Economy, Standby or Scheduler mode

    • Picture 1 Current season

    • Winter or Summer seasons will disable/enable humidity control and allow night cooling in summer

    • Picture 1 Press Menu button to enter in menu

  2. Picture 1 Press the temperature menu Picture 2 Temperature set point value
    • Picture 1 Press the temperature menu

    • Picture 2 Temperature set point value

    • Picture 2 Heat or Cool icon shows if the device is currently in Cooling or Heating mode

    • Picture 2 Press SP + and SP - buttons to change temperature set point for current working mode

    • Press Back to return to Home Screen when done

    • Temperature trouble shooting

  3. Picture 1 Press Fan speed button to enter Fan menu In C35-FV the Fan speed can be either 3 speed or EC motor Picture 2. Use SP + and SP - buttons to increase or decrease FAN speed. In 3 speed motor the speed can be OFF, 1/3, 2/3, 3/3, AUTO. In EC motor speed can be 0%, 20%, 40%. 60%, 80%, 100%, AUTO. Fan speed will always be working on this setting, irrelavant to the current setpoint and temperature
    • Picture 1 Press Fan speed button to enter Fan menu

    • In C35-FV the Fan speed can be either 3 speed or EC motor

    • Picture 2. Use SP + and SP - buttons to increase or decrease FAN speed. In 3 speed motor the speed can be OFF, 1/3, 2/3, 3/3, AUTO. In EC motor speed can be 0%, 20%, 40%. 60%, 80%, 100%, AUTO. Fan speed will always be working on this setting, irrelavant to the current setpoint and temperature

    • Current FAN speed is displayed in top row

    • Picture 2. Press AUTO button to make Fan speed be determined by C35-FV. If the setpoint is different current sensor reading, then the fan will work to maintain the setpoint. The values will be inetrnally calculated based on PID regulation parameters

    • Picture 2. Press OFF button to immediately turn offthe Fan

    • Picture 3. When Fan is turned off, it can be turned on to previous value by pressing the ON button, or by pressing the SP + or SP - button

    • Press Back button when you are done with making changes to return to Home Screen

  4. If device has no internal CO2 sensor and remote air quality sensor is not connected to analog input then -- ppm will be shown on home screen Press Air Quality menu to enter and change set point for current working mode
    • If device has no internal CO2 sensor and remote air quality sensor is not connected to analog input then -- ppm will be shown on home screen

    • Press Air Quality menu to enter and change set point for current working mode

    • Picture 2. Use SP + and SP - buttons to increase or decrease Air Quality (CO2) set point

    • Current Air Quality setpoint (CO2 level) is displayed in top row

    • Press Back button when you are done with making changes to return to Home Screen

Finish Line

Marko Lasic

Member since: 12/12/2016

3,290 Reputation

226 Guides authored

Team

Pobjednici Member of Pobjednici

Community

1 Member

226 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 18