In Out

Picture 1. Press Menu Button

Picture 2. Press Advanced to enter Advanced menu

Pciture 3. Enter Admin Password Menu appears

Use the numbers to enter 4 digit factory preset password. Number is being displayed in the blue ribbon

Press DEL button to delete incorrect number

Press OK to confirm input

Picture 1. Press In/Out button to enter In/Out menu

Picture 2. You entered In/Out menu

Picture 2. Use Home button to return to Home Screen

Picture 2. Use Up button to return to Advanced Menu

Picture 2. Use Next and Prev button to navigate through various settings

Binary input function: binary input can be used to notify several different external events: Fan alarm, Filter status, Run status.

Fan Alarm is used to to notify the C35-FAN device if the external fan suffered important error and stops working. Possible states are Off (normal) and On (not normal - find the cause of error). If the alarm turns on, in the C35-FAN device the Home Screen switches to Alarm screen with appropriate error message and blinking red light

Filter status is used to to notify the C35-FAN device of the status of the filter on the fan. Possible states are Clean (normal) and Unclean (not normal - filter needs changing) In the C35-FAN device the Home Screen turns to Status screen with appropriate status message

Run status is used to to notify the C35-FAN device of the status of the fan. Possible states are Running (normal) and Not running (not normal) In the C35-FAN device the Home Screen turns to Status screen with appropriate status message

Remote fan start is used to to start the C35-FAN Fan On by external signal override. Can be Off (normal, no external start) or On (external start)

Binary input usage: you can define which fan in C35-FAN device is affected by the signal on binary input. Choices are: Fan 1, or Fan 2 or neither

Binary input polarity: The contact polarity can be reversed by selecting the Binary input polarity “Normally open” or “Normally closed”

RTD sensor function: RTD input can be used to notify several different external events: Disabled, Fan alarm, Filter status, Run status, Remote fan start, Remote Temp

Fan Alarm is used to to notify the C35-FAN device if the external fan suffered important error and stops working. Possible states are Off (normal) and On (not normal - find the cause of error). If the alarm turns on, in the C35-FAN device the Home Screen switches to Alarm screen with appropriate error message and blinking red light

Filter status is used to to notify the C35-FAN device of the status of the filter on the fan. Possible states are Clean (normal) and Unclean (not normal - filter needs changing) In the C35-FAN device the Home Screen turns to Status screen with appropriate status message

Run status is used to to notify the C35-FAN device of the status of the fan. Possible states are Running (normal) and Not running (not normal) In the C35-FAN device the Home Screen turns to Status screen with appropriate status message

Remote fan start is used to to start the C35-FAN Fan On by external signal override. Can be Off (normal, no external start) or On (external start)

Remote sensor: selecting this option shows the current Temperature measured on the RTD resistor

RTD sensor usage: you can define which fan in C35-FAN device is affected by the signal on RTD input. Choices are: Fan 1, or Fan 2 or neither

RTD sensor polarity: The contact polarity can be reversed by selecting the “Normally open” or “Normally closed”

Screen [2 / 2] of the In/Out menu summarizes all of the values and states of the device’s inputs and outputs. These values are refreshed every second.