Skip to main content

Introduction

Learn which actuators can you connect to C35

  • 3 x AO 0-10V
  • 1 x AI 0-10V
  • 1 x Binary Input
  • 1 x AI Resistive
  1. Picture 1. Press Menu Button Picture 2. Press Advanced to enter Advanced menu Pciture 3. Enter Admin Password Menu appears
    • Picture 1. Press Menu Button

    • Picture 2. Press Advanced to enter Advanced menu

    • Pciture 3. Enter Admin Password Menu appears

    • Use the numbers to enter 4 digit factory preset password. Number is being displayed in the blue ribbon

    • Press DEL button to delete incorrect number

    • Press OK to confirm input

  2. Press In/Out menu button
    • Press In/Out menu button

  3. Change settings of Analog Input by pressing button Select Remote CO2 if you have connected duct air quality sensor to terminals 6 and 7 Select Remote temp
    • Change settings of Analog Input by pressing button

    • Select Remote CO2 if you have connected duct air quality sensor to terminals 6 and 7

    • Select Remote temp

    • Select Remote Humidity

    • Value from analog input sensor will be shown on home screen

    • Go to page 2/3 to set range for sensor connected to analog input

  4. Select function of temperature sensor conected to RTD analog input on terminals 8 and 9 Select Duct temp PT1000 for duct temperature sensor in order to control supply air temperature
    • Select function of temperature sensor conected to RTD analog input on terminals 8 and 9

    • Select Duct temp PT1000 for duct temperature sensor in order to control supply air temperature

    • When this option is selected Air temp will be written on home screen temperature menu.

    • Select "W/S changeover" if the temperature sensor will be used for automatic season changeover

    • Set "Summer changeover" temperature for automatic season changeover to Summer when temperature measured on RTD analog input is below set temperature.

    • Set "Winter changeover" temperature for automatic season changeover to Winter when temperature measured on RTD analog input is above set temperature.

  5. Read all values of inputs and outputs on page 3/3
    • Read all values of inputs and outputs on page 3/3

Finish Line

Marko Lasic

Member since: 12/12/2016

3,290 Reputation

226 Guides authored

Team

Pobjednici Member of Pobjednici

Community

1 Member

226 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 139