/
EN
/

Site Navigation

Your Account

Choose Language

Remote Screen: Working and Operating mode

Written By: Hrvoje Dean
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

0

Introduction

Learn how to change working and operating modes on remote C35 devices

  1. Working and operating modes are designed to have predefined set points, limitations and options in order to reduce energy consumption in different situations. All parameters and set point limitations for each mode are predefined by the technical person responsible for commissioning of the device. By changing the working and operating mode, the following will change: Temperature setpoint

    • Working and operating modes are designed to have predefined set points, limitations and options in order to reduce energy consumption in different situations. All parameters and set point limitations for each mode are predefined by the technical person responsible for commissioning of the device.

    • By changing the working and operating mode, the following will change:

    • Temperature setpoint

    • Humidity setpoint

    • Display settings

    • Following scheduler or not

    • There are two main working modes (Manual Control and Scheduler/Following scheduler)

    • There are three operating modes (Comfort, Economy and Standby)

  2. Prior using the Remote Controlled feature it has to be activated. It can be configured on the Devices screen in Advanced Menu

    • Prior using the Remote Controlled feature it has to be activated. It can be configured on the Devices screen in Advanced Menu

    • If Remote Controlled feature is activated, the remote device is controlled by C35‐CBMS and the working and operating mode can be changed only through the C35‐CBMS. Once a device is set as Remotely Controlled, Operating mode field indicates it and the Working and operating mode button is disabled and hidden

    • The device can be released from Remote Controlled state by unselecting YES in the corresponding column within C35‐CBMS Devices screen. If the connection between the C35‐CBMS and the remote device is lost, the device may remain locked in the Remote Controlled state

    • The Remote Controlled feature gives the C35‐CBMS exclusive control over changing the Working and operating mode of the remote device. This feature is especially useful when it is required to impose the same working mode to multiple devices

  4. Picture 1. To change working or operating mode, press Mode button on Home Screen. You enter a new Working modes menu Picture 2. In Working modes menu select the desired Operating mode. Selecting Comfort, Economy and Standby modes you also automatically select Manual working mode. After selection screen automatically returns to Home Screen

    • Picture 1. To change working or operating mode, press Mode button on Home Screen. You enter a new Working modes menu

    • Picture 2. In Working modes menu select the desired Operating mode. Selecting Comfort, Economy and Standby modes you also automatically select Manual working mode. After selection screen automatically returns to Home Screen

    • Picture 2. Scheduler mode automatically selects operating mode, based on time and the corresponding schedule for that day. After selection screen automatically returns to Home Screen

    • Pressing Back button returns to Home Screen without changing the working mode

    • ONLY ALL THE REMOTE CONTROLLED C35 DEVICES ARE AFFECTED, THE DEVICES SET AS MANUAL ARE NOT

    • Remote C35 Devices which are not set to be Remote controlled have to be changed manually, see next step

  5. Press the button to select a C35 Remote Device which is set to be Manual Picture 2. Press the Mode button to change Working and operating mode This time NO Working mode screen appears, but Modes change by order set in Picture 3. Comort -> Economy -> Standby -> Scheduler

    • Press the button to select a C35 Remote Device which is set to be Manual

    • Picture 2. Press the Mode button to change Working and operating mode

    • This time NO Working mode screen appears, but Modes change by order set in Picture 3. Comort -> Economy -> Standby -> Scheduler

Finish Line

Author

Hrvoje Dean

Member since: 12/28/2016

182 Reputation

199 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 13